Innovates your Parquet Production
Top Layer Lamella Formatting DUO 2/4 F
High Precision Double-side Lamella Edge Milling Machine
Double-side milling machine with 2 bottom feed chains for symmetric edge trimming (formatting) of top layer lamellas after drying, incl. “centered” infeed for optimized yield even with strong bending, lengthwise cupping or mixed oversize.
High feed speed machining (up to 100 m/min.) and perfect side faces, no tear-out or chipping, outstanding tolerances for straightness and parallelism - ideal for edge glueing.
Pneumatic top pressure system (v-belts) and lamella transport by high accuracy roller guided feed chains. Pneumatic roller centering infeed system according geometrical center-line for optimized & “balanced” machining of “Bananas” or other dying deformations. Perfect machining of side faces by opposing and “with feed” milling.
Fully automated width setting, infeed in-line or via manual hopper feeder, on request with additional width measuring system incl. extraction of undersize lamellas. Straightness, parallelism and width below +/- 0,05 mm (per m).
Optional: with 2 additional pre-cutters for higher feed speed, large oversize or reduction to next smaller standard-size.
| Technical data: | |
|---|---|
| width of lamellas: | 70 - 250 mm (optional up to 400 mm) |
| thickness of lamellas: | 2 - 10 mm |
| length of lamellas: | 500 - 2.500 mm (optional up to 3.500 mm) |
| feed speed: | 8 - 60 m/min. (optional up to 100 m/min.) |
| total electrical power: | approxim. 20 kW (optional up to 50 kW) |
| Motors (high precision spindle motors with individual inverters): |
| vertical side heads 7,5 kW power each, 6.000 - 9.000 rpm adjustable, (up to 11 kW) |
| feed drive 3,0 kW, 1.500 rpm |
| Tooling: |
| diameter 220 - 250 mm; cutting width 10 - 50 mm depending on version, 8 - 12 teeth, optional with “Rip-Tec”, mounted on hydro-sleeves (40 mm with hexagon). |
